In this article, we will cover how to return your SP700 printer back to its original format of being in Star mode - which is our recommended mode for this printer. Please note, for this you will need a Phillips head screwdriver (Otherwise known as a Pozidriv).
Follow the below steps
Turn off the printer and unplug all connecting cables.
Turn over your printer and unscrew the access panel as indicated in this image:
Move Dipswitch number 4 to the top, being very careful to not move any other switches.
โ
Your switches should look like the below image.Screw the access panel back on.
Connect your cables and power the printer back on.