Skip to main content
All CollectionsPrinter SetupEpson Printers
Epson TM-T88IV (USB) Receipt Printer Setup Guide
Epson TM-T88IV (USB) Receipt Printer Setup Guide

Step-by-step guide to set up your Epson TM-T88IV (USB) receipt printer, including driver installation and CleanCloud connection setup.

George avatar
Written by George
Updated over a month ago

⚠️ WARNING ⚠️

Please note that this printer is not on our supported hardware list, and we cannot provide support beyond the information in this article. Additionally, this article is a legacy document and is no longer updated.

Step 1: Check if the Printer is Already Installed

  • Ensure that your Epson TM-T88IV printer is powered on and connected to your computer using a USB cable.

  • On your Windows computer, open Control Panel. Navigate to Devices and Printers (or Printers and Faxes if you're using an older version of Windows). Look for Epson TM-T88IV Receipt in the list of printers:

    • If the printer appears in the list, skip to Step 3.

    • If it’s not listed, proceed to Step 2 to install the driver.


Step 2: Install the Printer Driver

  • First, download the Epson TM-T88IV printer driver from the official Epson website or a trusted source. Once downloaded, right-click on the file and select Extract All to unzip it.

  • Open the unzipped folder and double-click on "APD Installer" to start the installation. Follow the installation prompts:

    • Select Epson TM-T88IV as the printer model.

    • Choose USB as the connection port.

  • After installation, you’ll have the option to print a test page—do this to confirm that the printer is working correctly.

  • Once installed, verify that Epson TM-T88IV appears in Control Panel → Devices and Printers.


Step 3: Install QZTray

Download and install QZTray, an application that allows CleanCloud to connect to your printer via a web browser. Follow this QZTray setup guide for detailed installation instructions, and ensure that QZTray is running in the background on your computer.


Step 4: Add the Printer to CleanCloud

  1. Log in to your CleanCloud account and navigate to Settings → Hardware.

  2. Scroll down to the Garment Tag Printer section, and select Epson as the printer manufacturer.

  3. Enter the exact name of the printer as shown in Control Panel (e.g., "Epson TM-T88IV").

  4. Click the Update button. If this is your first printer setup, a permission box will appear, asking for CleanCloud to communicate with QZTray. Check Always Allow and press OK.

  5. If needed, you can activate settings like Auto Print Garment Tag.

✅ Your Printer is Ready to Use!

Try creating an order to test the printer and ensure everything is working smoothly.


⚠️ Troubleshooting

If you encounter any issues:


🛟 Need more help?

Explore our Help Center articles for answers. Contact us for further assistance.

Did this answer your question?